Filter
Top Products
¯ °
BASE
"3/8’ WASHER
4-1/2" PULLEYs/ ~
....... ~ ...........
~ 2-7/8" L-BRACKET
FIGURE 5
STEP 5
¯ Remove the 3/8 X 2" BOLT, two 3/8" WASHERS, one 2-7/8" L-BRACKETS, one 4-1/2" PULLEY, and one 3/8:’ LOCK NUT from the
upper flat on the BASE as shown in FIGURE 5.
BASE
18" WASHER
4-1/2"
3/8" WASHER~
FIGURE 6
;TEP 6
¯ SECURELY assemble the previously removed 4-1/2" PULLEY to the BASE using one 3/8 X 2-1/2" BOLT (1), two previously removed
3/8" WASHERS, one previously removed 2-7/8" L-BRACKET, one SWIVEL SNAP (3), one 3/8" HEX NUT (8), and one previously
removed 3/8" LOCKNUT. See FIGURE 6.