Filter
Top Products
BASE
3/8" LOCK NUT~
3/8" WASHER/~. / ~)
STEP 5
¯ Remove two 3/8 X 2" BOLTS, four 3/8" WASHERS, two 2-7/8" L-BRACKETS, two 4-1/2" PULLEYS, and two 3/8" LOCK NUTS from
the upper flats on the BASE as shown in FIGURE 5.
BASE
S~
/8 X 2-1/2"
.1 I~’~3/8" WASHER
FIGURE 6
"~3/a"LOCK NUT
STEP 6
¯ SECURELY assemble the previously removed 4-1/2" PULLEYS to the BASE using two 3/8 X 2-1/2" BOLTS (1), four previously
removed 3/8" WASHERS, two previously removed 2-7/8" L-BRACKETS, two SWIVEL SNAPS (3), two 3/8" HEX NUTS (8), and
previously removed 3/8" LOCK NUTS. See FIGURE 6.