Filter
Top Products
3/8 WASHER
~ ~
TOP BOOM
FIGURE 8
STEP 8
¯
Remove the 318 X 2-1/4" BOLT, two 3/8" WASHERS, one 3/8" LOCK NUT, and 3-1/2" PULLEY from the bracket on the TOP BOOM
as shown in FIGURE 8.
3/8" ~XNUT
,~3/8" WASHER
~..~
3-1/2" PULLEY
BOOM
FIGURE 9
STEP 9
SECURELY assemble the previously removed 3-1/2 PULLEY to the bracket on the TOP BOOM using on, 3/~" THREADED SHAFT
(9), two previously removed 3/8" WASHERS, two 2" PULLEYS (5), two 3/8" HEX NUTS (8), one previously removed 3/8"
NUT, and one 3/8" LOCK NUT (7). See FIGURE