Filter
Top Products
27
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of the total number of hours that the treadmill has
b
een used and the total number of miles that the walk-
ing belt has moved. The information mode also allows
you to select miles or kilometers as the unit of mea-
surement for the console, to turn on and turn off the
demo mode, and to reset all programs to the original
settings.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown in the display:
The Time zone of
the display will
show the total
number of hours
that the treadmill
has been used.
The Odometer
zone will show
the total number
of miles (or kilometers) that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers
will appear in the Pace/Speed zone. Press the Speed
increase button to change the unit of measurement if
desired.
IMPORTANT: If a “d” appears in the Heart Rate/
Calories zone of the display, the console is in the
“
demo” mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the con-
s
ole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence, although the buttons on the con-
sole will not operate. If a “d” appears when the infor-
mation mode is selected, press the Speed decrease
button so the “d” disappears.
To reset all programs to the
original settings, first press the
Start button. The word “SAVE”
will flash in the Pace/Speed
zone of the display. To reset
all programs, press the Save
button. If you do not wish to reset all programs, press
the Stop button.
To exit the information mode, remove the key from the
console.
Miles
Hours