Filter
Top Products
12
24. Route the Press Cable (41) under a 3 1/2” Pulley
(56). Attach the Pulley to the Base (1) with an
M10 x 96mm Button Head Bolt (77). Do not
thread a locknut onto the Bolt yet.
26. Attach the end of the Press Cable (41) to the indi-
cated bracket on the Base (1) with an M8 x
19mm Button Head Shoulder Bolt (85) and an M8
Nylon Locknut (102).
25. Wrap the Press Cable (41) over a 3 1/2” Pulley
(56). Attach the Pulley to the right “U”-bracket
(62) with an M10 x 46mm Button Head Bolt (76)
and an M10 Nylon Locknut (101).
24
25
26
77
41
56
56
1
41
76
62
101
102
1
85
41
27
41
56
68
77
1
101
27. Locate the left Press Cable (41). Route the
Cable under a 3 1/2” Pulley (56). Attach a 25mm
Spacer (68) and the Pulley to the Base (1) with
the indicated M10 x 96mm Button Head Bolt (77)
and an M10 Nylon Locknut (101).
28. Route the Press Cable (41) under a 3 1/2” Pulley
(56). Attach a 25mm Spacer (68) and the Pulley
to the Base (1) with the indicated M10 x 96mm
Button Head Bolt (77) and an M10 Nylon Locknut
(101).
28
41
56
68
77
1
101