Filter
Top Products
11
7. Have a second person hold the Left Pulse
Handrail (86) near the Left Upright (77). Insert
the Left Pulse Wire (90) from the Left Pulse
H
andrail through the hole in the Left Upright and
pull it out of the hole in the side of the Left
U
pright. Then, insert the Left Pulse Wire through
the loops in the ties.
Attach the Left Pulse Handrail (86) to the Left
Upright (77) with two 3/8" x 5" Patch Bolts (34)
and two 3/8" Star Washers (8). Do not fully
tighten the Patch Bolts yet.
Attach the Right Pulse Handrail (102) to the
Right Upright (79) as described above. Then,
tighten all four Patch Bolts (34).
7
102
86
91
34
90
Hole
8
8
77
79
34
Ties
8. Have a second person hold the Console (85)
near the Console Cover (87). Insert the wires
from the Console through the indicated hole.
Connect the Upright Wire (78), the Left and
Right Pulse Wires (90, 91), and the Ground
Wire (97) to the wires extending from the
Console (85). See the inset drawing. The con-
nectors should slide together easily and
snap into place. If they do not, turn one con-
nector and try again. IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER.
8
85
87
91
78
Hole
90
78
Console Wire
Wires
Ties
97