Filter
Top Products
8
4. Cut the tie from the Right Handrail (102). If nec-
essary, press the 5/16" Cage Nut (99) back into
place.
Cut the tie holding the Upright Wire (93). Route
the Upright Wire through the Right Handrail
(102) as shown.
Slide a Handrail Cover (103) onto the lower end
of the Right Handrail (102) as shown. Set the
Right Handrail on the right Upright (43) and slide
the lower end of the Right Handrail onto the
bracket on the right Upright. Make sure not to
pinch the Upright Wire (93).
Start three 5/16" x 3/4" Patch Bolts (2) with two
5/16" Star Washers (4) into the right Upright
(43) and the Right Handrail (102). Then, start
two #10 x 1/2" Screws (117). Firmly tighten the
three Bolts and the two Screws.
Slide the Handrail Cover (103) against the right
Upright (43).
102
4
2
2
43
Bracket
117
103
4
Tie
3. Identify the Left Handrail (101). Cut the tie from
the Left Handrail. If necessary, press the 5/16"
Cage Nut (99) back into place.
Slide a Handrail Cover (103) onto the lower end
o
f the Left Handrail (101) as shown. Set the Left
Handrail on the left Upright (43) and slide the
lower end of the Left Handrail onto the bracket
on the left Upright.
Start three 5/16" x 3/4" Patch Bolts (2) with two
5/16" Star Washers (4) into the left Upright (43)
and the Left Handrail (101). Then, start two #10
x 1/2" Screws (117). Firmly tighten the three
Bolts and the two Screws.
Slide the Handrail Cover (103) against the left
Upright (43).
101
Tie
2
117
4
2
103
43
Bracket
3
99
99
93