Filter
Top Products
11
9. Place the treadmill in the storage position (see
HOW TO FOLD THE TREADMILL on page 24).
Position the Base Plate (97) on the treadmill as
shown. Attach the Base Plate to the Uprights
(43) with two 3/8" x 2" Bolts (3). Note: It may be
helpful if a second person tips the treadmill
slightly as you tighten the Bolts.
Lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 25).
9
97
3
3
43
10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see pages 27 and 28). To protect the floor
or carpet from damage, place a mat under the treadmill.