Filter
Top Products
6. 6
While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).
Carefully insert the Upright (10) into the
Frame (1); be carefuJ not to damage the Wire
Harnesses (84, 85). Attach the Upright with four
M8 x 20mm Button Screws (107) and four M8
Split Washers (101 ).
Attach the Left Upper Body Arm (22) to the left
Upper Body Leg (24) with three M8 x 15mm
Button Screws (106).
Attach the Right Upper Body Arm (23) in the
same way.
Hold the Left Rear Upper Body Cover (26) and
the Left Front Upper Body Cover (27) around
the left Upper Body Leg (24). Attach the Upper
Body Covers with five M4 x 16mm Screws (97).
Attach the Right Rear Upper Body Cover (28)
and the Right Front Upper Body Cover (29)
in the same way.
Be carefuJ not
to damage the
Wire Harnesses
(84, 65) during
this step.
/,//
///
_10
i
i
97_
29
27