Filter
Top Products
Identify the Left Pedal (34) and the Left Pedal
Arm (32), which are marked with stickers.
Attach the Left Pedal (34) to the Left Pedal
Arm (32) with two M6 x 62ram Screws (108),
two M6 x 35mm Screws (109), and four M6
Split Washers (102).
Attach the Right PedaJ (not shown} to the
Right Pedal Arm (not shown) in the same
way.
Insert the Roller (38) on the Left Pedal Arm (32)
and the Roller on the Right Pedal Arm (33) into
the sides of the Ramp (5).
Attach the Rear Ramp Cover (7) to the
Ramp (5) with two M4 x 16ram Screws (97).
See the inset drawing. Lift the Pedal Arm
Latch (41) on the Left Pedal Arm (32), and set
the end of the Left Pedal Arm on the left Crank
Bushing Sleeve (54). Release the Pedal Arm
Latch, and make sure that the Left Pedal Arm is
securely connected to the Crank Bushing
Sleeve.
Connect the Right Pedal Arm (not shown} to
the right Crank Bushing Sleeve (not shown)
in the same way.
32
34
/
102
U
109
102
33
/
5
32
41
97
7
38
7