Filter
Top Products
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included he× keys and your own phillips screwdriver and rubber
mallet C-I---L-: _ "
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LESTon pages 20 and 21. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. tf a part is not in the parts bag, check to see if it has been preassembJed.
M6 Split Washer
(102)-8
M8 Split
Washer (101)-4
]
M8.5 x 16mm x
1.5mm Washer
(103)-6
f ....
....... J
M10 x 25mm M10 Curved Link Arm
Washer (87)-2 Washer (99)-4 Spacer (74)-4
M4 x 16mm
Wave Washer Screw (97)-16
(100)-2
M6 x 35mm
Screw (109)-4
M6 x 62mm
Screw (108)-4
M8 x 15mm Button
Screw (106)-10
M8 x 20mm Button
Screw (107)-4
M8 x 25mm Button
Screw (110)-2
M10 x 20mm Button
Screw (111)-2
M10 x 93mm Button Screw (82)-4
1, See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 11 and
unfold the elliptical exerciser.
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 93mm Button Screws
(82) and two M10 Curved Washers (99).
4