Filter
Top Products
Silver Strike Bowling™ Version 08/04 Page 9
© Copyright 2004 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
Please refer to the following diagram as well as a detailed diagram on page 45 for correct placements when
connecting cables to the I/O board:
Additional Instructions For Low or Medium Resolution Monitors:
To connect to a low or medium resolution RGB monitor refer to the figure below:
1. Connect one end of the 6 ft. SVGA video cable to the video out of the Nighthawk Chassis.
2. Connect the other end of the 6 ft. SVGA cable to the I/O board video in J501.
3. Connect the Red, Green, Blue video outputs, the composite sync, and video ground to the appropriate
monitor inputs. To find the correct JAMMA pin outs refer to the diagram on page 43.