Filter
Top Products
11.3. To correct problems by using the individual SPTA set
proceed as follows (see Fig. 6).
11.3.1. To replace the fuse link 2 in the protection device:
- Unscrew the threaded cover from the housing of the
protection device;
- Remove the defective fuse link;
- Insert the spare fuse link from the SPTA set;
- Screw the cover on the housing of the protection device.
11.3.2. To replace the rechargeable battery 1:
- Open the cover of the battery section;
- Remove the used battery;
- Fit the new battery in the section so that the "+" terminal of
the battery is connected with the bottom contact of the
section;
- Close the cover of the battery section.
11.3.3. To replace the fuse link in the charging device:
- Unscrew the outer threaded covers from the fuses;
- Unscrew the bayonet of the fuse link holders;
- Remove the fuse links;
- Fit in good fuse links;
- Close the holder covers;
- Screw on the outer threaded covers.
11.3.4. The individual SPTA set includes the following tools and
accessories:
- charging device 11, operated to charge the rechargeable
battery 10D-0,55С-1 from a vehicle electrical system
(27±2.7) V DC or 22-29 V and from a commercial line 220
V 50 Hz;
Description Designation Qty
Serial
No.
Remarks
Eraser
Cloth
Charging device
Protection device
Silica gel
Package
Package
Package
Casing
Casing
Cover
Cover
Cover
Operating manual
G61.93.516
AEP 43.79.608
AEP 43.79.607
AEP 42.86.186
AEP 42.83.368
AEP 42.86.184
G 42.62.345
AEP 45.71.018
AEP 42.63.021
AEP 42.63.030
G 42.63.332
1
2
1
1
50 g
1
1
1
1
1
1
1
1
1