Filter
Top Products
Page 7
NOTE:-
When the machine is fully assembled and in its final position, lower the 10 level
adjusters, (4 on the monitor cabinet and 6 on the ski assy (especially the two in front
of the step assy)), with a spanner so that all castors are raised from the floor, and the
machine is level.
Tighten the lock nuts with a spanner to ensure that the level adjusters do not move.
If this machine is installed on a smooth or shiny floor it is recommended that
rubber slip mats be placed under the feet to prevent the machine moving during
game operation.
2-3 Fitting the Safety Mat
1. Assemble the Floor Safety Mat by fitting the securing plates from underneath,
the support brackets from the top and retaining the assembly together with the
M6 Dome Nuts.
2. Place the assembled Safety Mat into position under the Ski Step Assy.
3. Retain the Safety Mat in position with the Hex Head Set Screws (M8x20)