Filter
Top Products
SAFETY WARNING
In order to use this machine safely, be sure to read this Installation and
Commissioning manual and the Operators Manual carefully before installation,
adjustment or use of this machine.
Whenever the owner of this machine entrusts disassembly, installation,
adjustment, routine maintenance or trouble shooting to another person, the owner
should ensure that that person read the appropriate precautions and relevant
sections of this manual before starting work.
In order that no accidents occur when the machine is in operation, strictly
follow the notes on safety described below.
Do not turn this machine ON until it has been correctly installed.
Warnings for Operation ( Requirements)
NOTE:
Only operate this machine after checking that it has been installed
correctly and in accordance with this manual.
NOTE:
Parts of this machine move during game play, so there are places where
the distance between the stationary section and moveable section
changes. There are warning notices to keep hands and feet clear of
moving parts, however if the operator feels that a person is in any
danger, he should warn that person accordingly.
NOTE:
The warning notices must always be kept in good condition and replaced
if worn, so that the customer can read it clearly.
NOTE:
If there is an error or problem with this machine, operation must be
stopped immediately and the problem rectified before further use.
NOTE:
Installation,service,adjustments and routine maitenance should be
carried out by qualified personel only.
Warnings for Disassembly, Installation, Routine Maintenance, and Troubleshooting.
DANGER:
Namco Ltd. bears absolutely no responsibility for accidents or injuries
resulting from unauthorized changes to this machine.
DANGER:
Ensure that the machine has been turned OFF before making
adjustments or carrying out maintenance. Also ensure only qualified
personnel carry out maintenance or turn the power ON to this
machine.
DANGER:
The power supply and inside the monitor will remain hot and have
areas of high voltage even though the machine has been turned OFF,
and there is a possibility of burns or electric shock. Be careful not to
touch these areas.
DANGER:
In order to avoid injuries due to mis-operation, be sure that the
voltage of the main power supply is within the prescribed limits. Also
to prevent possible electric shocks due to failure, this machine MUST
be fitted with a securely connected earthed plug.
NOTE:
Do not turn the power switch ON until the machine has been installed
correctly.