Filter
Top Products
Page
I/O TEST
DIP 4 12345678 ............................(a)
SWITCH TEST ............................(b)
MOTOR TEST ............................(c)
STEP ADJUST ............................(d)
EXIT
SELECT L/R BUTTON : CHOOSE
DECISION BUTTON : ENTER
3-3-3 I/O Test
1. Select item (3) “I/O Test” on the menu screen to test the switches,
motor and step adjust.
2. Press ‘Select L/R’t to select the required item, then press the
‘Decision’ button to enter the test.
3. Select “EXIT” and press the ‘Decision’ button to return to the menu
screen.
(a) Shows condition of DIP SW 4 on the PCB. In normal operation all
switches are OFF. (If a switch is ON, it will be displayed in red.)
(b) For testing Switches and Control Pots. (See 3-3-3-1 )
(c) For testing the Step-Lock Motor. (See 3-3-3-2)
(d) For initializing the Step Control Pots. (See 3-3-3-3)
12