Filter
Top Products
www.greenmasterfitness.com.tw
25
COMPUTER OPERATION
A
F
G
H
E
I
J
B
C
D
E
K
Calories/Calories Per Hour A B Time/Distance
Express Incline Buttons C F Heart Rate
Preset Programs E H Express Speed Buttons
Incline/Level G J Speed and Incline Profile Display
Recovery I
Emergency Stop Button K
POWER ON:
Set the POWER SWITCH, located on the bottom of the left handle bar upright tube, to ON and insert the SAFETY KEY. All the LED
lights will auto scan then display the factory default setting:
CALORIES window will display : 0
TIME window will display : 0:00
SPEED window will display : SPEED
INCLINE window will display : 0
HEART RATE window will display : 0
SLEEP / DISPLAY MODE:
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 3 minutes without receiv ing any input.
Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
To cancel the SLEEP MODE feature using the DISPLAY MODE and always keep the console display on, press the EMERGENCY
STOP button to power off the treadmill, press and hold the SPEED UP and DOWN buttons, press the EMERGENCY STOP button
again to power on the treadmill. After one short beep sound the HEART RATE window will show “1”. Press the START button then
TIME LED window will show “ON” (SLEEP MODE f eature on) or “OFF” (SLEEP MODE feature off). Press the INCLINE UP and
DOWN buttons to switch between “ON” and “OFF” then press STOP to save the setting and return to POWER ON mode.