Filter
Top Products
STEP 6:
FIGURE 6
8
STEP 5:
FIGURE 5
2
12
• Pull back on the SPRING PIN and slide the ADJUSTABLE SEAT (12) over the BENCH FRAME (2) as shown in FIGURE 5.
2
3/8 X 3-1/2” (90m) 63
75
78
73
76
53 3/8 X 4” (97m)
1
• LOOSELY assemble the BENCH FRAME (2) to the UPRIGHT SUPPORT (6) and the BASE (1) using eight RH CAPS (78), two
3/8 X 3-1/2” BOLTS (63), two 3/8 X 4” BOLTS (53), eight 3/8” SAE WASHERS (75), eight 3/8” RH WASHERS (76) and four
3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 6.
6
SPRING PIN