Filter
Top Products
STEP 17:
FIGURE 17
14
STEP 16:
FIGURE 16
14
1/2 X 3” 57
73
13
76
78
73
75
13
1
53 3/8 X 4” (97m)
• SECURELY assemble the SWIVEL SUPPORT (13) to the BASE (1) using four RH CAPS (78), two 3/8 X 4” BOLTS (53), four 3/
8” SAE WASHERS (75), four 3/8” RH WASHERS (76) and two 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 16.
• SECURELY assemble the SWIVEL (14) to the SWIVEL SUPPORT (13) using one 1/2 X 3” SHOULDER BOLT (57), one 3/8” SAE
WASHER (75), one 3/8” RH WASHER (76), one 3/8” LOW HEIGHT LOCK NUT (73) and one RH CAP (78) as shown in FIGURE
17.
76
78
75