Filter
Top Products
23
FIGURE 33
STEP 33:
45
78
76
38
73
62
• Route the LEG CABLE (45) through the bracket on the BASE (1) and assemble one 4-1/2” PULLEY (38) to the bracket on the
BASE (1) using four RH CAPS (78), two 3/8 X 1-3/4” BOLTS (62), four 3/8” SAE WASHERS (75), four 3/8” RH WASHERS (76)
and two 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 33.
3/8 X 1-3/4” (43m)
1
• Assemble the swivel end of LEG CABLE (45) to the PEDESTAL (7) using two RH CAPS (78), one 3/8 X 1-3/4” BOLT (62), two
3/8” SAE WASHERS (75), two 3/8” RH WASHERS (76), and one 3/8” LOW HEIGHT LOCK NUT (73). See FIGURE 33.
7
75
55
78
76
3/8 X 3-3/4” (93m) 66
62 3/8 X 1-3/4” (43m)
• Route the LEG CABLE (45) through the BENCH FRAME (2) and assemble one 4-1/2” PULLEY (38) to the BENCH RAME (2)
using one RH CAP (78), one BLACK RH CAP (77), one 3/8 X 3-3/4” BOLT (66), two 3/8 X 1”FLANGE SPACERS (55), two
3/8” SAE WASHERS (75), two 3/8” RH WASHERS (76), one CABLE CLIP (49) and one 3/8” LOW HEIGHT LOCK NUT (73)
as shown in FIGURE 33.
73
75
49
38
77
2
BLACK