Filter
Top Products
22
FIGURE 14
S
TEP 14:
A. Securely assemble one 3-1/2"
Pulley (37) to the Pulley Plates (10),
using one 3/8 x 1-3/4" Bolt (53) and
one 3/8" Lock Nut (63).
Note: Loop the Leg Cable (30) over
the Pulley before assembling the
Pulley Plates, as shown in Figure
14.
STEP 15:
A. Securely assemble one 3-1/2"
Pulley (37) and both Rear Guide
Cables (74) to the Base Plates (11),
using one 3/8 x 4-1/4" Bolt (68), two
3/8 x 1" Spacers (51) and one 3/8"
Lock Nut (63).
Note: Loop the Leg Cable (30) over
the Pulley before assembling the
Base Plates, as shown in Figure 15.
B. Adjust the Turnbuckle at the top of
each Rear Guide Cable (74) to add
tension to the Rear Guide Cables
(74) until they are taut.
C. Screw the threaded end of the Leg
Cable (30) into the end of the Pulley
Bracket (9).
F
IGURE 15