Filter
Top Products
STEP
8:
A. Securely assemble the Three Prong Knob (43) to the Front Base (1) as shown.
B. Insert the Seat Adjust Assembly (7) into the Front Base (1) as shown. The seat height can be
adjusted using the Spring Pin and can be secured with the Three Prong Knob (43).
C. Assemble the Leg Pedestal (8) to the Front Base (1) using two RH caps (47), one 1/2 x 104mm
Bolt (58), two 1/2" Washers (46) and one 1/2" Low Height Lock Nut (62).
Note: Tighten this connection enough to prevent excess play yet allow the Leg Pedestal to
rotate freely.
16
1/2 X 104mm
47
62
1
8
58
46
3
43
SPRING PIN
FIGURE 8