Filter
Top Products
11
STEP 1:
A. Loosely assemble two Base Plates (11) to the Front Base (1) and the Base Connector (3) using
four 3/8 x 3-3/4" Bolts (57) and four 3/8" Lock Nuts (13). See Figure 1.
B. Loosely assemble the Footplate (66) to the Front Base (1) using one 3/8 x 3" Bolt (67) and one
3/8" Lock Nut (63) as shown in Figure 1.
C. Loosely assemble the Rear Base (4) to the Base Connector (3) using two 3/8 x 3-3/4" Bolts (57),
two 3/8" Washers (64) and two 3/8" Lock Nuts (63).
D. Loosely assemble the Upright (2) to the Front Base (1) using two 3/8 x 2-3/4" Bolts (60), two 3/8"
Washers (64) and two 3/8" Lock Nuts (63).
2
63
4
11
57 3/8 X 3-3/4”
66
3/8 X 3”
63
63
63
67
64
64
1
3
60
3/8 X 2-3/4”
57
FIGURE 1