Filter
Top Products
IMPORTANT!
CHECK THE BELT EDGE UNDER THE TREADMILL TO VERIFY THE BELT DOES NOT INTERFERE WITH LIFE-
SPRING BRACKETS AND THE BELT IS PROPERLY SET WITHIN THE BELT GUIDES.
PHYSICAL DIMENSIONS:
PRE-OPERATION CHECKLIST
(A digital version of the Operation Manual can be found on the attached CD.)
4 Ensure that all fasteners are tight.
4 Make sure the STRIDING BELT is properly tensioned and aligned according to the Operation Manual.
4 Check the operation of the STOP switch and tether switch assembly.
(See Operation Manual.)
4 Confirm the display console is set to English or Metric units.
(See Optional Settings ENG/MET in Operation Manual.)
4 Refer to the Operation Manual for real time clock setting.
4 Read the entire Operation Manual before using the treadmill.
LISTE DES VÉRIFICATIONS À EFFECTUER AVANT LA MISE EN MARCHE
(Une version électronique du Manuel de l'utilisateur peut être trouvée sur le CD)
4 Vérifiez si tous les dispositifs de fixation sont serrés.
4 Assurez-vous que le TAPIS est bien tendu et aligné, conformément aux instructions du manuel d'utilisation.
4 Vérifiez le fonctionnement de l'interrupteur d'ARRÊT et reliez-le.
(cf. Manuel de l'utilisateur).
4 Vérifiez si la console d'affichage est sur le système métrique ou anglais.
(Référez-vous aux réglages facultatifs relatifs aux systèmes de mesure dans le Manuel de l'utilisateur.)
4 Consultez le Manuel de l'utilisateur pour le réglage de l'horloge en temps réel.
4 Lisez le Manuel de l'utilisateur dans son intégralité avant d'utiliser le tapis roulant.
Before attempting to operate your Treadmill, it is imperative that you familiarize yourself with the contents of the
Operation Manual. If your Life Fitness treadmill does not respond as described in the OPERATION MANUAL contact the
Life Fitness Customer Support Services at 800.351.3737 (toll-free within U.S.A., Canada). Refer to the OPERATION
MANUAL for a contact list for International Offices.
Prior to your call, please be sure you have located and noted the MODEL NUMBER & SERIAL NUMBER. The Model
and Serial numbers for each unit are located on the back of the unit near the toe guard as well as under the left rear
endcap.
8
WEIGHT LBS (KG) STEP UP HEIGHT
PHYSICAL DIMENSIONS INCHES (CM)
MODEL LOW VOLTAGE HIGH VOLTAGE INCHES CM LENGTH WIDTH HEIGHT
CLST
403
(183 kg)
413
(187 kg)
11 28
83
(211 cm)
37
(94 cm)
63.5
(161 cm)
97Ti
431
(195 kg)
440
(200 kg)
13 33
83
(211 cm)
37
(94 cm)
65.5
(166 cm)
CST
410
(186 kg)
420
(191 kg)
11 28
83
(211 cm)
37
(94 cm)
63.5
(161 cm)