Filter
Top Products
5 SERVICE MENU
5.1 ENTERING AND USING THE SERVICE MENU
Managers and other authorized personnel can use the Service Menu to access diagnostics, information, maintenance,
and configuration submenus. Enter this menu system by pressing and holding down the PAUSE key and pressing the
CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words SERVICE
MENU. Release the PAUSE key and press the QUICK START key. The MESSAGE CENTER then displays MANAGER
CONFIG. Use the UP and DOWN arrow keys to navigate through the two Configuration Submenus:
• Manager’s Configuration. See the following page for a list of Manager’s Configuration (Optional Settings).
• Manufacturer’s Configuration.
Note: The ENTER key cannot be used to select the Manufacturer’s Configuration submenu which contains settings that
cannot be changed by the customer.
SERVICE MENU OVERVIEW
DIAGNOSTICS (SYSTEM TEST)
The Diagnostics submenu allows technicians to run systems diagnostics. Use the UP and DOWN arrow keys to navigate
through the list of diagnostic utilities. Use the ENTER key to select the current navigated utility. Press the CLEAR key to
exit the current diagnostic utility. Press the CLEAR key repeatedly to exit the Diagnostics Menu.
Note: These tests should only be used by (or with the express instruction of) a trained Life Fitness service technician.
INFORMATION
The Information submenu allows authorized personnel to view system statistics and other details. Use the UP and DOWN
arrow keys to navigate through the list of diagnostic utilities and / or display information. Use the ENTER key to select the
current navigated utility. Press the CLEAR key to exit the current diagnostic utility. Press the CLEAR key repeatedly to exit
the Information Menu.
System Statistics Software Version
Main Motor Information Lift Motor Information
System Errors Maintenance Information
Belt / Deck Information
MAINTENANCE
The Maintenance submenus allow authorized personnel to log maintenance events.
CONFIGURATION
Use the UP and DOWN arrow keys to navigate through the two Configuration Submenus: Manager’s Configuration and
Manufacturers Configuration. See the next page for a list of Manager’s Configurations (Optional Settings).
32