Filter
Top Products
7
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELY assemble two 3-1/2” PULLEYS (12) to the TOP BOOM (2) using two 3/8 X 2-3/4” BOLTS (25), four 3/8”
FLANGE SPACERS (33), and two 3/8” LOCK NUTS (32). See FIGURE 6. (NOTE: BEFORE TIGHTENING, MAKE SURE
CABLE (15) IS IN THE GROOVES OF THE PULLEYS.)
STEP 6:
• Insert two 2 X 3” END CAPS (34) into the TOP BOOM (2) as shown in FIGURE 6.
• Route threaded end of the LAT CABLE (15) through the TOP BOOM (2) as shown in FIGURE 6.
FIGURE 6
• Insert two GUIDE ROD BUSHINGS (20) into the BUSHINGS of the TOP BOOM (2) as shown in FIGURE 6.
2
FIGURE 7
STEP 7
• LOOSELY assemble two 3-1/2” PULLEYS (12) to two 1-3/4” X
5-1/4” PLATES (17) using two 3/8 X 2” BOLTS (24) and two 3/8”
LOCK NUTS (32) as shown in FIGURE 7.
24 3/8 X 2”
12
17
34
15
12
32
20
32
33
33
25 3/8 X 2-3/4”