Filter
Top Products
14
STEP 17:
FIGURE 17
• If upon completion of assembly, the HEAD PLATE (14) does not sit on top of the first WEIGHT PLATE (43), push the HEAD
PLATE (14) down, insert the WEIGHT STACK PIN (39) and perform several repetitions at the press station. This will relax the
cable system and prevent the HEAD PLATE (14) from lifting up. See FIGURE 17.
• If after completing previous step, the HEAD PLATE (14) still does not sit on top of the first WEIGHT PLATE (43) or if there is
excess slack in the cable system, adjust the threaded end of the LAT CABLE (15) and the LOW ROW CABLE (16) accordingly and
retighten the jam nut. See FIGURE 17.
14
• Make sure all connections are tight and secure.
THIS CONCLUDES THE ASSEMBLY OF THE 841101 WEIGHT STACK OPTION
43