Filter
Top Products
11
FIGURE 11
STEP 11:
• Route the threaded end of the LOW ROW CABLE (16) around the bottom PULLEY of the PULLEY & PLATE ASSEMBLY (17)
as shown in FIGURE 11.
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 12
STEP 12:
16
• Screw the threaded end of the LOW ROW CABLE (16)
approximately 3/4” into the end of the post on the
WEIGHT STACK BASE (7) and tighten jam nut securely.
See FIGURE 12.
POST
16
17
7
• SECURELY tighten the BOLTS in the PULLEY &
PLATE ASSEMBLY (17) as shown in FIGURE 11.