Filter
Top Products
Slide Mechanism to insert
or Exchange Handles
Cable
K
M
J
L
K
I
17
STEP 8:
Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CONNECT COU-
PLER (I). Carefully remove the QUICK CONNECT SPRING (L), the QUICK CONNECT SLEEVE (K) and the QUICK
CONNECT HOUSING (J).
Slide the QUICK CONNECT HOUSING (J), QUICK CONNECT SPRING (L), and QUICK CONNECT SLEEVE (K)
onto the cable as shown. Insert the cable end into the QUICK CONNECT COUPLER (I).
Slide the entire assembly over the QUICK CONNECT COUPLER (I). Attach the QUICK CONNECT COUPLER (I) and
QUICK CONNECT HOUSING (J) together. Use the two M5 HEX SCREWS (M) to tighten.
NOTE: IF NECESSARY, ENSURE CABLES ARE PROPER LENGTH; MAKE NECESSARY ADJUSTMENTS TO THE
WEIGHT STACK PULLEY (TIGHTEN OR LOOSEN); THREAD THE END OF THE CABLE; AND REMOVE THE PUL-
LEY FROM THE HOUSING AND SPIN CLOCKWISE OR COUNTER CLOCKWISE TO LOOSEN/TIGHTEN.
ITEM QTY DESCRIPTION
I 1 QUICK CONNECT COUPLER
J 1 QUICK CONNECT HOUSING
K 1 QUICK CONNECT SLEEVE
L 1 QUICK CONNECT SPRING
M 2 M5 HEX SCREW