Filter
Top Products
15
STEP 6:
Uncoil the cables to remove all twists.
Remove the (UPPER) PULLEYS (13) on the RIGHT TOWER (11) and LEFT TOWER (1) by removing the M10 x
50mm SCREW (52), PULLEY RETAINER (53), M10 SOCKET HEAD NUT (51), and PARTIAL PULLEY COVERS
(14). Set the (UPPER) PULLEYS (13) and hardware aside.
Remove the (LOWER) PULLEYS (13) on the RIGHT TOWER (11) and LEFT TOWER (1) by removing the M10 x
45mm SCREW (48), two M10 WASHERS (44), and M10 HEX NYLOCK NUT (49).
48
44
44
49
13
Lower Pulley
14
53
52
51
14
13
Upper Pulley