Filter
Top Products
8
Assembly
Step 4
Attach the front leg (12) to the front stabilizer (11) with two M10X95mm bolts (64) and two
M10 nylon locknuts (58).
Step 5
Position the frame (8) so that the hexagonal holes are on the bottom. Attach the frame (8)
to the crossbar (5) using three M10X70mm bolts (33), two M10 washers (43), and three M10
nylon locknuts (58).
58
58
43
43
5
8
Hexagonal
Holes
33
33
3 3
Figure 5
12
58
11
64
Figure 4
NOTE
:
Hand tighten bolts and nylon nuts until machine is fully assembled.