Filter
Top Products
6
1
2
58
58
4
29
29
Recessed Areas
3
Assembly
Step 1
Insert four M10X60mm carriage bolts (29) up through the bottom of the right stabilizer (2).
Attach the right upright (4) to the right stabilizer (2) with indicated carriage bolts and nylon
locknuts (58).
Repeat to complete the assembly of the left stabilizer (1) and left upright (3).
Note: Make sure the recessed areas around the holes on stabilizers are on the bottom.
Figure 1
NOTE
:
Hand tighten bolts and nylon nuts until machine is fully assembled.