Filter
Top Products
5
Assembly: Parts Identifier
The Keys Fitness KF-3.0T Treadmill will require assembly before operating. Place unopened
box on a clean, level surface. After opening the box, remove any packing material from the
treadmill.
Do not throw away any packing materials until the unit is working properly.
Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-340-0482.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Phillips Screwdriver
Ref # Description Qty Ref # Description Qty
U2T1 MAIN FRAME 1 U4J24 SCREW ST4.2*12 6
U4T4 LEFT UPRIGHT 1 U4J5 BOLT M10*25 12
U4T5 RIGHT UPRIGHT 1 U4J7 BOLT M8X52 5
U2D1 CONSOLE 1 U4J28 SAWTOOTH WASHER #8 6
UAS29 LEFT PROTECTION COVER 1 U4J27 SAWTOOTH WASHER #10 12
UAS30 RIGHT PROTECTION COVER 1 UAW8 #6 ALLEN WRENCH 1
UAT6 LEFT HANDLEBAR 1 UAW9 #5 ALLEN WRENCH 1
UAT7 RIGHT HANDLEBAR 1 UAW10 WRENCH W/SCREW DRIVER 1
U4T11 CROSS BAR 1
U4J4 BOLT M8X26 1
U2T1
U4T4
U4T5
U2D1
UAS29
UAS30
U4J24
U4J5
U4J27
UAW8 UAW9 UAW10
U4J28
U4J7
UAT6
UAT7
U4T11
U4J4