Filter
Top Products
Assembly
9
5. Connect the Upper Electronic Wire(70)
and the two Pulse Cables(75) to the
Console(76). Next, fasten the Console(76) to
the top of the Console Tube(12) using four
Screws(83).
Note: The four Screws(83) will already be
installed into the back of the Console(76)
when you remove it from the box.
6. First, install the Left Lower Handlebar(90)
onto the Console Tube(72). Use Washer(21),
Nylock Nut(22), and a Nut Cap(85).
Connect the Upper Left Handlebar(96) to the
Lower Left Handlebar(90) with two Carriage
Bolts(93), two Washers(94), and two Cap
Nuts(95). Insert the Connecting Tube(84) into
the bottom of the Lower Left Handlebar(90)
using Screw(87), Washer(26), and a Nylock
Nut(27). Last, repeat step 6 to assemble the
right side.
Figure 5
Figure 6