Filter
Top Products
Moving Instructions
CAUTION! TO REDUCE THE POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND
KEEP YOUR BACK STRAIGHT. AS YOU LEAN THE UNIT, LIFT USING YOUR LEGS, NOT YOUR
BACK.
With the elliptical tracks in the locked position(safety latch is engaged), grasp the console tube and place one
foot on the base as shown in Figure 1. Next, with a firm grasp on console tube, place one foot on the center of
the base of the mainframe and carefully tilt the unit back until it rolls freely on the transport wheels. Using
extreme caution, move the unit to the desired location as shown in Figure 2. To set the unit down, place one
foot on the center of the base of the mainframe and carefully lower unit onto base in a resting position. Do not
attempt to move the unit over an uneven or rough surface.
19
Figure 1
Figure 2