Filter
Top Products
Assembly
7
1. Attach the Front Stabilizer(2) onto the
Main Frame(1) with the two Carriage
Bolts(4), two Arc Washers(5) and two Cap
Nuts(6).
2. First take off both Rollers(49) by
removing Bolts(48) from the Main
Frame(1). Install the Aluminum
Rails(52&53) to the Main Frame(1).
First slide on the four Washers(51)
before installing the Aluminum
Rails(52&53). After the rails are
installed, reinstall the Rollers(49) with
Hex Head Bolts(48).
Figure 2
Figure 1
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition.
Do not dispose of the packing material until the assembly is completed. Tools have been provided for
you to use when assembling the product. If you need assistance please go to our website at
www.keysfitness.com or call 1 888-340-0482.