Filter
Top Products
Assembly
8
4. Slide the Console Tube Cover(71) onto
the Console Tube(12). Connect the Upper
Electronic Wire(69) to the Lower
Electronic Wire(70). Last, slide the
Console Tube(12) into the Main Frame(1)
using six Screws(30) and six Washers(16).
Figure 4
3. Install the Left Pedal(36) onto the Left
Pedal Tube(33) using two Hex Head
Bolts(38). Then install the Left Pedal
Tube(33) to the U Bracket(19) with
Carriage Screw(20), Washer(21), and
Nylock Nut(22). Repeat Step 3 to assemble
the right side.
Figure 3