Support User Manuals

Invacare BAR750 Camping Equipment User Manual

Open as PDF

of 32

SECTION 4—PACKAGING, HANDLING AND SET-UP

BAR750 22 Part No 1143215

SECTION 4—PACKAGING,

HANDLING AND SET-UP

Receiving

1. Countcartonsbeforesigningshippingpapers.

2. Designatesomeoneatthefacilitytoreceiveandinspectallmerchandise.Usethe

masterorderacknowledgmenttocheckoffitemsastheyarereceived.

3. Comparethenumberofcartonsshippedwiththenumberofcartonsactuallyreceived

andnotesuchontheconsigneecopyofthefreightbill.Makesuretohavethetruck

driversignthecopyacknowledgingthecount.

4. Ifshortageoccurs,IMMEDIATELYcontactInvacareat(800)333‐6900.

ƽ WARNING

DO NOT plug the power cord into a power source until assembly is complete. To

do so could result in damage or personal injury.

DO NOT attempt to operate bed controls prior to completion of assembly.

Otherwise, damage to bed components may occur.

Set-Up

Assembling the Bed

ƽ WARNING

DO NOT attempt to operate bed controls prior to completion of assembly as

damage to bed components or personal injury may occur.

NOTE:Forthisprocedure,refertoFIGURE 4.1onpage24.

1. Removepackingbandsfromthebed.SeeDetail“A” ofFIGURE 4.1.

2. Graspcastormountonhead‐endsectionofbed.

3. Pullsectionupandflipitoveruntilwheelstouchthefloor.

4. Grasptheback‐restofhead‐endsectionandrotate

ituntilthesectionrestsonthe

framesectionalreadyonfloor.SeeDetail“B”ofFIGURE 4.1.

5. Locatetwoclevispins(oneeachsideofbed)onbackrestofhead‐endsectionwhich

connectshippingbracetobed.SeeDetail“C”ofFIGURE 4.1.

6. Removetheclevispinfromthebedandpackingbrace.

7. RepeatSTEP6and7fortheotherside.

NOTE:Saveclevispinstoassemblethebed.

previous next