Filter
Top Products
23
THE INFORMATION MODE
T
he console features an information mode that keeps
track of the total number of hours that the treadmill has
b
een operated and the total distance that the walking
belt has moved. The information mode also allows you
to select miles or kilometers as the unit of measure-
ment and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and then
release the Stop button. When the information mode is
selected, the following information will be displayed:
The priority dis-
play will show the
total number of
kilometers (or
miles) that the
walking belt has
moved. The
lower right corner
of the display will
show the total number of hours that the treadmill has
been operated. An “M” for metric kilometers or an “E”
for English miles will appear in the lower left corner of
the display. Press the Speed increase button to change
the unit of measurement if desired.
IMPORTANT: If a
“d” appears in the
l
ower left corner
of the display, the
c
onsole is in the
“demo” mode.
This mode is in-
tended to be used
only when a
treadmill is displayed in a store. When the console is in
the demo mode, the power cord can be plugged in, the
key can be removed from the console, and the indica-
tors in the display will automatically appear in a preset
sequence; the buttons on the console will not operate.
If
a “d” appears when the information mode is se-
lected, press the Speed decrease button so the “d”
disappears.
To exit the information mode, remove the key from the
console.