Filter
Top Products
20
HOW TO CONNECT YOUR VCR
N
ote: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
b
eing used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 19.
A. Plug one end of a long 3.5 mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the AUDIO OUT jack on your VCR.
B. Plug one end of a long 3.5 mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-adapter (available at electronics
stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR and
plug the wire into the unused side of the Y-adapter.
Plug the Y-adapter into the AUDIO OUT jack on
your VCR.
HOW TO USE AN IFIT MP3, CD, OR VIDEO
PROGRAM
To use an iFIT MP3, CD, or video program, you must
c
onnect the treadmill to your MP3 player, CD player, or
V
CR. See HOW TO CONNECT THE TREADMILL TO
USE IFIT PROGRAMS on pages 18 to 20. To down-
load iFIT MP3 programs, go to www.iFIT.com. To
purchase iFIT CDs or videocassettes, call the tele-
phone number on the front cover of this manual.
Follow the steps below to use an iFIT MP3, CD, or
video program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
Select the iFIT mode.
To select the iFIT mode, press the iFIT button.
The letters “iFIT” will appear below the matrix in
the display.
Press the Play button on your MP3 player, CD
player, or VCR.
Note: If you are using an iFIT CD, insert the CD
into your CD player; if you are using an iFIT video-
cassette, insert the videocassette into your VCR.
A moment after the Play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions. Note: If the time is flashing in the dis-
play, press the Start button or the Speed increase
button on the console. The treadmill will not re-
spond to an MP3, CD, or video program while the
time is flashing in the display.
During the program, an electronic “chirping” sound
will alert you when the speed and/or incline of the
treadmill is about to change.
CAUTION: Always
listen for the “chirp” and be prepared for speed
and/or incline changes. In some instances, the
speed and/or incline may change before your
personal trainer describes the change.
3
2
1
B
VIDEO AUDIO
A
NT. IN
RF OUT
IN
OUT
CH
34
A
AUDIO OUT
RIGHT
LEFT
VIDEO AUDIO
ANT. IN
R
F OUT
IN
OUT
CH
34
Audio Cable
A
B
VIDEO AUDIO
ANT. IN
RF OUT
IN
OUT
CH
34
A
AUDIO OUT
RIGHT
LEFT
VIDEO AUDIO
ANT. IN
RF OUT
IN
OUT
CH
34
B
Wire removed from
AUDIO OUT jack
RCA
Y-adapter
Audio Cable