Filter
Top Products
STEP 8 (See Diagram 8)
A.) Attach a Chain (#66) to the Lower Cable (#60) by using a Hook (#67). Attach the
Shiver Bar Handle (#19) to the Chain by using another Hook. Adjust the length of the
Chain to obtain the desired Arm Curl exercise. Replace Shiver Bar Handle with Ankle
Strap (#68) for various exercises. Remove the Chain and Shiver Bar Handle when
using the Leg Developer.
B.) Attach Right & Left Weight Stack Covers (#15 & #16) to the Upper Frame (#4), Base
Frame (#5), and Rear Base Frame (#2). Secure them with six M10 x 5/8” Allen Bolts
(#72) and ¾” Washers (#84).
C.) From the back of the Covers, secure the two covers together with three M5 x 3/8”
Philips Screws (#82) and three M5 Aircraft Nuts (#90).
D.) Insert a L-shaped Lock Pin (#93) through the hole on Guide Rod and lock with a
Combination Lock (#98) to prevent any un-authorized usage of the machine.
E.) Unlock the Lock and attach it to Selector Rod before using the machine.
DIAGRAM 8
21