Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the Front Press Base (#2) to the Right Upper Frame (#1). Secure it with one 6 ¾”
Front Press Base Axle (#29), two Ø 1 ¼” x Ø 3/8” Washers (#70), and two M10 Aircraft
Nuts (#102). Do not over tighten the Nuts; make sure the Base is able to swivel.
B.) Attach the Front Press (#3) to the Front Press Base (#2). Secure it with one 7 5/8” Front
Press Axle (#30), two Ø 1 ¼” x Ø 3/8” Washers (#70), and two M10 Aircraft Nuts (#102).
Do not over tighten the Nuts; make sure the Press Arm is able to swivel.
C.) Thread the Short T-shaped Lock Pin (#78) into the tube on the Front Press to obtain the
desired Front Press position.
D.) Attach the Backrest Board (#43) to the Backrest Support Frame (#5). Secure it with two M8
x 1 5/8” Allen Bolts (#85) and Ø 5/8” Washers (#101).
E.) Attach the Backrest Support Frame (#5) to the Right Vertical Frame (#4). Secure it with one
M10 x 4 3/8” Allen Bolt (#89), two Ø ¾” Washers (#100), and one M10 Aircraft Nut (#102).
F.) Thread a Long T-shaped Lock Pin (#77) into the hole on the Right Vertical Frame to obtain
the desired Backrest position.
10