Filter
Top Products
8
ASSEMBLY STEP 3
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
BOLT (G)
15 mm
Qty: 4
HARDWARE BAG 3 CONTENTS :
CONSOLE CABLES
CONSOLE MAST
CONSOLE
SPRING WASHERS (B)
BOLTS (G)
FLAT WASHERS (H)
DO NOT ATTACH
THIS SIDE
UNTIL STEP 3-D
A Disengage the deck lock latch with your
foot to lower the running deck.
B Open hardware bag 3.
C Gently place the console on top of the
console masts. Attach the left side first
using 2 bolts (g), 2 spring washers (b)
and 2 flat washers (h).
NOTE: Do not completely tighten bolts (g)
until step 4-D.
D Connect the console cables, carefully
tucking wires in masts to avoid damage.
E Attach the right side of the console
using 2 bolts (d), 2 spring washers
(b) and 2 flat washers (c).
NOTE: Be careful not to pinch any wires
while attaching the console.