Filter
Top Products
6
ASSEMBLY STEP 1
A Open HARDWARE BAG 1.
B Cut banding straps. Do not move or lift treadmill
from packaging.
C Move LEFT LINKAGE ARM into position.
Insert BOLT (A) and FLAT WASHER (B) into
LEFT LINKAGE ARM followed by a TEFLON
WASHER (C) and attach to elevation frame.
D Lift LEFT CONSOLE MAST into upright
position. Be sure to hold the console mast
firmly, as it will not stay in the upright position on
its own.
E Insert BOLT (D) and 1 FLAT WASHER (E)
through LEFT CONSOLE MAST followed by
a WAVY WASHER (F) and attach to MAIN
FRAME.
FLAT WASHER (B)
20 mm
Qty: 1
WAVY WASHER (F)
29 mm
Qty: 1
BOLT (D)
Qty: 1
BOLT (A)
15 mm
Qty: 1
TEFLON WASHER (C)
18 mm
Qty: 1
FLAT WASHER (E)
27 mm
Qty: 1
HARDWARE BAG 1 CONTENTS :
BOLT (D)
FLAT WASHER (E)
WAVY WASHER (F)
MAIN FRAME
LEFT CONSOLE MAST
BOLT (A)
FLAT WASHER (B)
LEFT LINKAGE ARM
TEFLON WASHER (C)