KNOW YOUR UPRIGHT BIKE
Express Series
22
Your Horizon Fitness upright bike is designed to be reliable and maintenance free.
However, if you do experience problems with your upright bike, please reference
the troubleshooting guide listed below.
PROBLEM: There is no display on the console.
SOLUTION: Remove the console and verify that the console cable is attached
properly, making sure that the cable is securely inserted into the console.
PROBLEM: The upright bike makes a squeaking or chirping noise.
SOLUTION: Loosen all bolts attached during the assembly process, grease the
threads and tighten again.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too
easy. (Bsc3 only)
SOLUTION: Reset the console and allow the resistance to reset to the default
position. Restart the console and retry the resistance levels.
PROBLEM: There is no heart rate reading
SOLUTION: Remove the console and verify that the heart rate cables are
attached properly, making sure that the cables are securely inserted into the con-
sole.
SOLUTION: If you are using the chest strap, there may be a poor connection
between the electrodes and the skin. Remoisten the electrodes with water.
SOLUTION: The chest strap may not be positioned properly. Reposition the
chest strap. It may be necessary to experiment with the fit and position of the
chest strap.
SOLUTION: Verify that the distance between the chest strap and the console is
not beyond the recommended range of 36 inches.
SOLUTION: The battery in the chest strap may be dead. Take the chest strap
to a jewelry store or return to Horizon Fitness for a battery replacement.
TROUBLESHOOTING YOUR UPRIGHT BIKE
HEART RATE TROUBLESHOOTING
Express 300
13
PEDALS
CONSOLE
CONSOLE MAST
FRONT
FOOT
TUBE
POP PIN
SEAT
TRANSPORT
WHEEL
REAR SUPPORT
TUBE
SIDE COVERS
GRIP PULSE
HANDLEBARS
express 2002 console owner’s guidev2.0.qxd 3/24/2003 1:25 PM Page 14