Filter
Top Products
BEFORE
YOU BEGIN
18
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY
ELLIPTICAL
OPERATION
BEFORE
YOU BEGIN
ASSEMBLY
19
INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ELLIPTICAL
OPERATION
ASSEMBLY
POWER
Your programmable elliptical is powered by a power supply. The power must be plugged into the power jack,
which is located in the front of the machine near the STABILIZER TUBE. Make sure the console power switch is
in in the ON position. Note: Not all units have an ON/OFF switch on the console.
Do not operate the elliptical if the power cord or plug is damaged.
If the elliptical appears to not be working properly, do not use the elliptical.
MOVING
Your elliptical has a pair of transport wheels built
into the FRONT STABILIZER TUBE. To move, first
remove the power supply and firmly grasp the
CONSOLE MAST, carefully tilt and roll.
Our ellipticals are well built and heavy, weighing up to 200 lbs! Use care and
additional help if necessary when moving.
FOOT POSITIONING
Your elliptical offers a variety of foot positions. Moving your foot to the forward most position of the foot pad
increases your step height, which will create a feel similar to a step machine. Placing your foot toward the
back of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or
run.
Your elliptical also allows you to pedal both forward and backwards to offer a variation to your workout and to
focus on other major leg muscle groups such as your hamstrings and calves.
E L L I P T I C A L O P E R AT I O N
E X - 5 5 CO N S O L E DI S P L AY
A
B
E
D
C
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) MONITOR DISPLAY: Start, Stop, Program Profile, Level, Time, MPH, RPM, Distance, ODO, Calories, Watts, Age,
Target HR, and Heart Rate.
B) UP/DOWN ARROW KEYS: Used to adjust program setting values & resistance levels.
C) ENTER: Used to select your program and program settings.
D) START / STOP: Press to start/pause/end your workout. Hold for 2 seconds to reset the elliptical.
E) MODE: Used to select between displayed options.
WATTS DESCRIPTION: A WATT is a measurement of your power output based on the resistance level and speed
you are pedaling. For example, if you lower the resistance level and increase your pedaling speed you can still be
outputting the same number of watts. Many people will use WATTS as a way to gauge the relative intensity of a
workout.
TARGET HEART RATE: The Target HR is calculated as 85% of your maximum heart rate.
HZ_Ellipticals_Rev.1.5.indd 18-19 8/15/06 2:35:59 PM