Filter
Top Products
9
6. Set the console assembly (A) face-down on a
soft surface to avoid scratching the console.
A
ttach the Left and Right Trays (104, 105) to the
console assembly with six #8 x 1/2" Screws (1).
6
1
1
104
105
7. With the help of a second person, hold the con-
sole assembly near the Left Upright (88).
Route the Upright Wire (77) around the indicated
crossbar. Then, route the Upright Wire through
the looped ties on the bottom of the console as-
sembly.
Connect the Upright Wire (77) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Console
Assembly
Console
Assembly
88
7
77
77
Console
Wire
Console
Wire
Ties
Crossbar