Filter
Top Products
8
5. Identify the Left and Right Base Covers (83, 84).
Slide the Left Base Cover onto the Left Upright
(88). Slide the Right Base Cover onto the Right
Upright (89). Do not press the Base Covers
into place yet.
Remove the wire tie from the Upright Wire (77).
88
83
89
77
Wire
Tie
84
5
4
. Hold the Left Upright (88) against the Base
(91). Be careful not to pinch the Upright
Wire (77) or the Ground Wire (90). Insert two
3/8" x 2 3/4" Patch Bolts (7) and two 3/8" x
1
1/4" Patch Bolts (8) with two 3/8" Star
Washers (13) into the Left Upright.
Partially tighten the 3/8" x 2 3/4" Patch Bolts (7)
a
nd the 3/8" x 1 1/4" Patch Bolts (8) until the
heads of the Patch Bolts touch the Left Upright
(88); do not fully tighten the Patch Bolts yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
88
91
4
8
8
7
13
77, 90
13