Filter
Top Products
8
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable.
D
o not fully fold the Frame until the treadmill
is completely assembled.
Attach two Base Pads (81) to the Base (85) with
two #8 x 1" Tek Screws (1).
1
85
55
1
81
5
6. Insert an Extension Leg (97) into the Base (85)
as shown; if necessary, use a rubber mallet to
fully insert the Extension Leg. Next, hold two
Extension Leg Nuts (10) in the bottom of the
Extension Leg, and tighten two 5/16" x 2" Bolts (2)
with two 5/16" Star Washers (9) into into the top
of the Extension Leg.
2
97
9
85
6
7. Attach the Left Upright (111) to the Base (85)
with a 3/8" x 1" Bolt (4), a 3/8" x 2 3/4" Bolt (5),
and two 3/8" Star Washers (8). Start both Bolts
before tightening them.
4
5
111
85
7
81
8
8
10