Filter
Top Products
16
HOW TO USE A CLASSIC WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
1
3.
2. Select a classic workout.
To select a classic workout, press one of the
Classic Workouts buttons repeatedly until the
name of the desired workout appears in the matrix.
When a classic workout is selected, the Incline dis-
play will show the maximum incline setting of the
workout and the Speed display will show the maxi-
mum speed setting. The Time display will show
how long the workout will last. After a few seconds,
the matrix will show the profile of the workout.
3. Start the walking belt.
Press the Start button or Speed increase button to
start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The height of the flash-
ing segment indicates the speed setting for the cur-
rent segment. At the end of each segment, a series
of tones will sound and the next segment of the pro-
file will begin to flash. If a different speed or incline
s
etting is programmed for the next segment, the
speed or incline setting will flash in the display to
a
lert you.
The workout will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline
buttons. Note: When the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings for
the next segment.
4. Follow your progress with the matrix and the
displays.
See step 5 on pages 14 and 15.
5. Measure your heart rate if desired.
See step 6 on page 15.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
Current Segment